Material: resin Style: landscape Type: home decoration Note: 1,Powering on before submerged in water can damage the product. 2,Do not touch the nebulizer during operation.Please turn off the power of the nebulizer before touching it. 3,Please turn off the power when not in use to extend the service life. 4,The atomizer will produce water mist. When the water mist hits the table, water may form. This is a normal physical phenomenon called condensation. If you see water on the table, not a product damage leaking, just the temperature of the table top is lower than the water mist, causing the water mist to turn into water. Just put a small towel under the product to solve it.

Pump installation method: 1. Connect the water pump and the water pipe and connect them together; 2. adjust the pump switch size to the appropriate location.It is recommended to adjust to the "+" position 3. Place the connected water pipes and pumps in the right place for the product 4. Pump flat, and then add water to completely submerged water pump, plug in the power can be normal operation. Precautions: 1, Pumps must be placed in the water will work properly, the pump is waterproof design; 2, the battery in the water surface must exceed the maximum height of the pump at least 1-2 cm, can extend the pump life; 3, if the water is not large, please check the pump on the water switch is open to the maximum; 4, as long as 3-5 days for a water, half a month to clean the pump, you can extend the life of the pump.